Do you want to know how to deep clean bathroom tiles? If your answer is yes, you are in the perfect place. Here You will get complete information about how to deep clean bathroom tiles. While we’d all like our bathrooms to remain relaxing, clutter-free spaces, the reality is that with regular use, these rooms can get very dirty quickly.

Especially if you have tile in your bathroom, the spaces you’ll be cleaning (like your shower) can go from gleaming to dingy thanks to a buildup of grime, soap scum, and even mold. Without proper care and cleaning, dirty tiles can quickly transform your bathroom from a spa-like oasis to a room at the top of your deep-clean list.

Here Is How To Deep Clean Bathroom Tiles

To keep your bathroom and shower sparkling clean, you’ll have to go to some lengths to clean the tiles and grout. Beforehand, we reached out to cleaning experts to get their best tips on how to deep clean bathroom tiles to keep them looking like new.

Make A Basic Cleaner For Bath Tiles And Tap

First of all, you need to clean the surface with a rag. It is important to do basic cleaning of bathroom tiles and faucets before focusing on stubborn stains.

Vinegar is a powerful cleaner that helps loosen dirt and grime. Make a vinegar solution with water and store it in a spray bottle. Spray on tiles and faucets and wipe with a dry cloth or simply allow them to air dry.

Lemon juice serves the same purpose as vinegar. Thanks to its acidic properties, you can simply squeeze some lemon juice onto a damp sponge and wipe the tile with it. You can also sprinkle baking soda on the tile.

Dip a sponge in warm water and dry it. This is most effective if the bathroom tiles are full of dirt. Baking soda will help loosen any hardened dirt you find on corner tiles and faucets.

After doing the basic cleaning, the hard water stains will still be there and the hardened dirt will only have loosened. Effective strategies and deep cleaning solutions need to be adopted to remove sand and dirt from bathroom tiles. Here are some surefire ways to thoroughly clean bathroom tiles and taps.

Go For Deep Clean Bathroom Tiles And Taps

There are some bathroom cleaning tips and tricks that remove stains effectively. There is no need to buy expensive cleaners at the local market, instead, you can make an effective homemade bathroom cleaner using ingredients from your own kitchen.

Make a baking soda cleaner. Take a half cup of baking soda, and add about a quarter cup of hydrogen peroxide, and a teaspoon of liquid dish soap. Add the mixture to a spray bottle. Now apply it on the tiles and faucets and leave it there for about 10 minutes. Use a damp sponge and rinse.

Another effective homemade bathroom cleaner and disinfectant is a bleach water solution. The ratio of bleach to water should be 1:3. Use 5 tablespoons of bleach in a cup of water and mix well. Using bleach as a cleaner requires some precautionary measures.

Open doors and windows to let fresh air into the room. Wear rubber gloves when preparing the solution. Spray the mixture on tiles and faucets where brown, hard stains are found. Let the solution sit for about 10-15 minutes, before rubbing it off with a damp toothbrush or sponge.

Ammonia is also an effective cleaner. Make your own ammonia cleaner by mixing water and ammonia in a 2:1 ratio. Apply the solution on the surface of the tiles and on the faucets and leave it there for a good two hours. Let the ammonia work its way through stubborn stains. The surface can then be cleaned.

How To Deep Clean The Tiles Grout

Mortar is where most of the dirt, germs, and bacteria take refuge. It is necessary to keep the tile grout clean to get clean, squeaky surfaces. Take baking soda and water and apply them to the grout using a toothbrush. The bristles of the toothbrush will help remove dirt from the grout.

You can also use salt to remove bathroom stains, especially those embedded in grout. Sprinkle salt and baking soda on bathroom tiles and near faucets where the surface is stained. Now pour some vinegar over it. When the vinegar and baking soda mix, it starts boiling.

Use a toothbrush and work through the grout on the tiles and also near the faucets. Leave it for an hour or so. Then rinse the bathroom with water and wash the bathroom tiles and faucets with any detergent. The entire bathroom will be cleaned in no time.

Faqs | How To Deep Clean Bathroom Tiles

How do you clean bathroom tiles to make them look like new?

• Brush off the dust. Before you start cleaning your bathroom tiles, wipe the surface with a dry cloth to remove any dust and dirt.
• Avoid harsh chemicals.
• Dry.
• Clean the surface.
• Clean little and often.
• Make sure the tiles are sealed.
• Sweep on the surface.
• Use a neutral pH cleaner.

What do professionals use to clean bathrooms?

Professionals use baking soda to clean various bathroom surfaces, including the toilet, bathtub, sink, floor and drain. To clean the toilet, you need to spray soda on the inside surface and spray vinegar on it. Then use the toilet brush to scrub and finally rinse

What is the best homemade floor cleaner?

A safe bet is to mix ½ cup of denatured alcohol, ½ cup of vinegar, a few drops of dish soap, and 2 liters of water. The alcohol removes stubborn stains, while the detergent helps remove grease and residue. The clean entire floor then rinses with fresh water if necessary.

Is there an easy way to clean bathroom tiles?

Vacuum the floor, then wet wash the floor weekly with mild soap and water. A mixture of oxalic acid and water can be used to remove stains. Rinse after stain removal by rubbing moistened with a soft cloth. Never use acidic cleaners, such as ammonia or vinegar, as they can damage or discolor the tiles.

Also, read this: BEST METHODS OF CLEANING LIMESTONE FLOORS, 2022