Learn How to Properly Clean Marble Floors | Best Guide Of 2022

Learn How to Properly Clean Marble Floors

Do you want to know learn how to properly clean marble floors? In this article, you will get complete information about it. People who have marble floors may think that because they are made of stone, they won’t need a lot of maintenance to keep them in tip-top shape.

This is only partially true. Even though marble floors are made from much sturdier base materials than hardwood or wood laminate flooring, they still need a bit of maintenance to keep them looking good.

Simple tips to maintain the constant shine of your marble and clean marble floors

It’s a good first step to vacuum or dust marble floor surfaces regularly before cleaning them. You should know that you should only use lukewarm water on marble floors as the mild acid in the vinegar could be very damaging to your surface.

Again, squeeze all excess moisture out of a damp towel and rag, and after washing, quickly follow up with a dry towel. You must dry marble floors quickly, as they stain easily.

Clean the toughest stains

Clean marble floors are complicated enough, so try these other cleaning methods at your own risk, however, if you’re dealing with more stubborn stains, they might be worth a try.

Tea and coffee stains

These types of stains can be effectively removed with the cleaning method, using 20% ​​hydrogen peroxide that you can easily buy at the pharmacy, instead of a liquid rust remover. Since these are organic stains, this cleaning method could work to clean these stains, although since the tiles have been etched, let’s just say it could be a rather complicated task.

Oxide stains

To remove rust stains, mix a commercial liquid stain remover paste from a hardware store and powdered bleach from a paint store.

Use it to cover the area with a 1/2-inch thick layer. Keep the area moist by covering it with cling film sealed with masking tape and after 10-15 minutes rinse the area with water, then scrub the marble floor with a dry cloth. If necessary, you can repeat the process.

In most cases, all you need to properly clean marble tiles is a warm, damp rag or rag, especially if there are spill-prone children and adults in your home.

Fortunately, as these tiles are gaining popularity for home use, so too will the different products and solutions formulated to clean them.

It’s best to have some on hand, in case of accidental spills, and you can keep them around the house for regular weekly or monthly cleaning. Just be sure to read the product label and follow the directions to the end.

Although vinegar is considered a powerful and readily available household cleaner, its use for cleaning marble floors is not recommended, as the acid in the vinegar can damage the surface.

Mild soaps and detergents are also not recommended, so if you’re not using a special marble cleaner, it would be safe to just use lukewarm water and get a soft towel to help dry the floor well.

Schedule a deep clean once a month

For marble floors, periodic cleaning is essential, at least once a month but more depending on traffic or the presence of dirt. Use a soap-free cleaner with a neutral pH (pH7), if possible, which will minimize streaking or film formation. You can also use a mild, phosphate-free dish soap or stone soap specifically for marble.

  • To clean, first, moisten the surface of the stone with clean water; you can use a spray bottle or a wrung-out rag to avoid soaking the floor.
  • Then apply the cleaning solution according to the manufacturer’s instructions with a soft broom.
  • Then rinse the surface thoroughly with clean water, taking care to change the water with fresh water as needed.
  • Dry the surface with a soft cloth. Drying marble floors is an important step after any cleaning or spot treatment, according to the Marble Institute of America. Some marbles contain iron oxide and water can bring it to the surface and leave rust stains.


Can marble floors be cleaned naturally?

Marble floors are best cleaned naturally, but only up to a point. We are often advised to use home remedies like vinegar and baking soda to clean various areas of our home. However, these should not be used on marble.

The best way to clean marble floors is to use warm water and a neutral pH cleaner or eco-friendly soap. You should avoid using acidic or alkaline products like vinegar and baking soda.

However, if you choose to use baking soda on stubborn stains, do so carefully. Do not allow the baking soda to sit and soak into the surface for long periods of time. Lightly rub with a damp cloth, then rinse well.

How can I repair dull stains on my marble floors?

Dull stains can appear quickly if the wrong type of cleaner is used or if some spills remain. Acidic stains like red wine, coffee, and soft drinks or alkaline stains like olive oil and green tea can also cause dullness.

These can cause cloudiness even if you clean the spill immediately with water and a mild detergent. Fortunately, you can restore the shiny surface by using a polishing powder specifically for marble.


Leave a Comment

Your email address will not be published. Required fields are marked *